Thermal stability effects of removing the type-2 copper ligand His306 at the interface of nitrite reductase subunits.

Nitrite reductase (NiR) is a highly stable trimeric protein, which denatures via an intermediate, N(3)<--(k)-->U(3)--(k)-->F (N-native, U-unfolded and F-final). To understand the role of interfacial residues on protein stability, a type-2 copper site ligand, His306, has been mutated to an alanine. The characterization of the native state of the mutated protein highlights that this mutation prevents copper ions from binding to the type-2 site and eliminates catalytic activity. No significant alteration of the geometry of the type-1 site is observed. Study of the thermal denaturation of this His306Ala NiR variant by differential scanning calorimetry shows an endothermic irreversible profile, with maximum heat absorption at T (max) approximately equal to 85 degrees C, i.e., 15 degrees C lower than the corresponding value found for wild-type protein. The reduction of the protein thermal stability induced by the His306Ala replacement was also shown by optical spectroscopy. The denaturation pathway of the variant is compatible with the kinetic model N(3)--(k)-->F(3), where the protein irreversibly passes from the native to the final state. No evidence of subunits' dissociation has been found within the unfolding process. The results show that the type-2 copper sites, situated at the interface of two monomers, significantly contribute to both the stability and the denaturation mechanism of NiR.

Protein film voltammetry of copper-containing nitrite reductase reveals reversible inactivation.

The Cu-containing nitrite reductase from Alcaligenes faecalis S-6 catalyzes the one-electron reduction of nitrite to nitric oxide (NO). Electrons enter the enzyme at the so-called type-1 Cu site and are then transferred internally to the catalytic type-2 Cu site. Protein film voltammetry experiments were carried out to obtain detailed information about the catalytic cycle. The homotrimeric structure of the enzyme is reflected in a distribution of the heterogeneous electron-transfer rates around three main values. Otherwise, the properties and the mode of operation of the enzyme when it is adsorbed as a film on a pyrolytic graphite electrode are essentially unchanged compared to those of the free enzyme in solution. It was established that the reduced type-2 site exists in either an active or an inactive conformation with an interconversion rate of approximately 0.1 s(-1). The random sequential mechanism comprises two routes, one in which the type-2 site is reduced first and subsequently binds nitrite, which is then converted into NO, and another in which the oxidized type-2 site binds nitrite and then accepts an electron to produce NO. At high nitrite concentration, the second route prevails and internal electron transfer is rate-limiting. The midpoint potentials of both sites could be established under catalytic conditions. Binding of nitrite to the type-2 site does not affect the midpoint potential of the type-1 site, thereby excluding cooperativity between the two sites.

Protonation of a histidine copper ligand in fern plastocyanin.

Plastocyanin is a small blue copper protein that shuttles electrons as part of the photosynthetic redox chain. Its redox behavior is changed at low pH as a result of protonation of the solvent-exposed copper-coordinating histidine. Protonation and subsequent redox inactivation could have a role in the down regulation of photosynthesis. As opposed to plastocyanin from other sources, in fern plastocyanin His90 protonation at low pH has been reported not to occur. Two possible reasons for that have been proposed: pi-pi stacking between Phe12 and His90 and lack of a hydrogen bond with the backbone oxygen of Gly36. We have produced this fern plastocyanin recombinantly and examined the properties of wild-type protein and mutants Phe12Leu, Gly36Pro, and the double mutant with NMR spectroscopy, X-ray crystallography, and cyclic voltammetry. The results demonstrate that, contrary to earlier reports, protonation of His90 in the wild-type protein does occur in solution with a pKa of 4.4 (+/-0.1). Neither the single mutants nor the double mutant exhibit a change in protonation behavior, indicating that the suggested interactions have no influence. The crystal structure at low pH of the Gly36Pro variant does not show His90 protonation, similar to what was found for the wild-type protein. The structure suggests that movement of the imidazole ring is hindered by crystal contacts. This study illustrates a significant difference between results obtained in solution by NMR and by crystallography.

Effect of the methionine ligand on the reorganization energy of the type-1 copper site of nitrite reductase.

Copper-containing nitrite reductase harbors a type-1 and a type-2 Cu site. The former acts as the electron acceptor site of the enzyme, and the latter is the site of catalytic action. The effect of the methionine ligand on the reorganization energy of the type-1 site was explored by studying the electron-transfer kinetics between NiR (wild type (wt) and the variants Met150Gly and Met150Thr) with Fe(II)EDTA and Fe(II)HEDTA. The mutations increased the reorganization energy by 0.3 eV (30 kJ mol-1). A similar increase was found from pulse radiolysis experiments on the wt NIR and three variants (Met150Gly, Met150His, and Met150Thr). Binding of the nearby Met62 to the type-1 Cu site in Met150Gly (under influence of an allosteric effector) lowered the reorganization energy back to approximately the wt value. According to XRD data the structure of the reduced type-1 site in Met150Gly NiR in the presence of an allosteric effector is similar to that in the reduced wt NiR (solved to 1.85 A), compatible with the similarity in reorganization energy.

A rearranging ligand enables allosteric control of catalytic activity in copper-containing nitrite reductase.

In Cu-containing nitrite reductase from Alcaligenes faecalis S-6 the axial methionine ligand of the type-1 site was replaced (M150G) to make the copper ion accessible to external ligands that might affect the enzyme's catalytic activity. The type-1 site optical spectrum of M150G (A(460)/A(600)=0.71) differs significantly from that of the native nitrite reductase (A(460)/A(600)=1.3). The midpoint potential of the type-1 site of nitrite reductase M150G (E(M)=312(+/-5)mV versus hydrogen) is higher than that of the native enzyme (E(M)=213(+/-5)mV). M150G has a lower catalytic activity (k(cat)=133(+/-6)s(-1)) than the wild-type nitrite reductase (k(cat)=416(+/-10)s(-1)). The binding of external ligands to M150G restores spectral properties, midpoint potential (E(M)<225mV), and catalytic activity (k(cat)=374(+/-28)s(-1)). Also the M150H (A(460)/A(600)=7.7, E(M)=104(+/-5)mV, k(cat)=0.099(+/-0.006)s(-1)) and M150T (A(460)/A(600)=0.085, E(M)=340(+/-5)mV, k(cat)=126(+/-2)s(-1)) variants were characterized. Crystal structures show that the ligands act as allosteric effectors by displacing Met62, which moves to bind to the Cu in the position emptied by the M150G mutation. The reconstituted type-1 site has an otherwise unaltered geometry. The observation that removal of an endogenous ligand can introduce allosteric control in a redox enzyme suggests potential for structural and functional flexibility of copper-containing redox sites.

Calorimetric and spectroscopic investigations of the thermal denaturation of wild type nitrite reductase.

Nitrite reductase (NiR) is a multicopper protein, with a trimeric structure containing two types of copper site: type 1 is present in each subunit whereas type 2 is localized at the subunits interface. The paper reports on the thermal behaviour of wild type NiR from Alcaligenes faecalis S-6. The temperature-induced changes of the copper centres are characterized by optical spectroscopy and electron paramagnetic resonance spectroscopy, and by establishing the thermal stability by differential scanning calorimetry. The calorimetric profile of the enzyme shows a single endothermic peak with maximum heat absorption at T(m) approximately 100 degrees C, revealing an exceptional thermal stability. The thermal transition is irreversible and the scan rate dependence of the calorimetric trace indicates that the denaturation of NiR is kinetically controlled. The divergence of the activation energy values determined by different methods is used as a criterion for the inapplicability of the one-step irreversible model. The best fit of the DSC profiles is obtained when the classical Lumry-Eyring model, N<-->U-->F, is considered. The simulation results indicate that the irreversible step prevails on the reversible one. Moreover, it is found that the conformational changes within the type-1 copper environments precede the denaturation of the whole protein. No evidence of protein dissociation within the temperature range investigated was observed.

Thermal stability of wild type and disulfide bridge containing mutant of poplar plastocyanin.

A comparative study of the thermal stability of wild type poplar plastocyanin and of a mutant form containing a disulfide bridge between residues 21 and 25 was performed using differential scanning calorimetry and optical spectroscopic techniques. For wild type plastocyanin the transition temperature, determined from the calorimetric profiles, is 62.7 degrees C at the scan rate of 60 degrees C/h, whereas for the mutant it is reduced to 58.0 degrees C. In both cases, the endothermic peak is followed by an exothermic one at higher temperatures. The unfolding process monitored by optical absorption at 596 nm also reveals a reduced thermal stability of the mutated plastocyanin compared to the wild type protein, with transition temperatures of 54.8 and 58.0 degrees C, respectively. For both proteins, the denaturation process was found to be irreversible and dependent on the scan rate preventing the thermodynamic analysis of the unfolding process. In parallel, small conformational changes between wild type and mutant plastocyanin emerge from fluorescence spectroscopy measurements. Here, a difference in the interaction of the two proteins between the microenvironment surrounding the fluorophores and the solvent was proposed. The destabilization observed in the disulfide containing mutant of plastocyanin suggests that the double mutation, Ile21Cys and Glu25Cys, introduces strain into the protein which offsets the stabilizing effect expected from the formation of a covalent crosslink.

Bidirectional catalysis by copper-containing nitrite reductase.

The copper-containing nitrite reductase from Alcaligenes faecalis S-6 was found to catalyze the oxidation of nitric oxide to nitrite, the reverse of its physiological reaction. Thermodynamic and kinetic constants with the physiological electron donor pseudoazurin were determined for both directions of the catalyzed reaction in the pH range of 6-8. For this, nitric oxide was monitored by a Clark-type electrode, and the redox state of pseudoazurin was measured by optical spectroscopy. The equilibrium constant (K(eq)) depends on the reduction potentials of pseudoazurin and nitrite/nitric oxide, both of which vary with pH. Above pH 6.2 the formation of NiR substrates (nitrite and reduced pseudoazurin) is favored over the products (NO and oxidized pseudoazurin). At pH 8 the K(eq) amounts to 10(3). The results show that dissimilatory nitrite reductases catalyze an unfavorable reaction at physiological pH (pH = 7-8). Consequently, nitrous oxide production by copper-containing nitrite reductases is unlikely to occur in vivo with a native electron donor. With increasing pH, the rate and specificity constant of the forward reaction decrease and become lower than the rate of the reverse reaction. The opposite occurs for the rate of the reverse reaction; thus the catalytic bias for nitrite reduction decreases. At pH 6.0 the k(cat) for nitrite reduction was determined to be 1.5 x 10(3) s(-1), and at pH 8 the rate of the reverse reaction is 125 s(-1).

Thermodynamic analysis of the contributions of the copper ion and the disulfide bridge to azurin stability: synergism among multiple depletions.

The stabilizing potential of the copper ion and the disulfide bridge in azurin has been explored with the aim of inspecting the ways in which these two factors influence one another. Specifically, whether copper and disulfide contributions to protein stability are additive has been examined. To this aim, the thermal unfolding of a copper-depleted mutant lacking the disulfide bridge between Cys3 and Cys26 (apo C3A/C26A azurin) was studied by differential scanning calorimetry. A comparison of the unfolding parameters of holo and apo C3A/C26A azurin with the apo C3A/C26A protein has shown that the effects of simultaneous copper and disulfide depletion are additive only at two temperatures: T=15 degrees C and T=67 degrees C. Within this range the presence of the copper ion and the disulfide bridge has a positive synergistic effect on azurin stability. These findings might have implications for the rational use of the stabilizing potential of copper and disulfides in copper protein engineering.

Reconstitution of the type-1 active site of the H145G/A variants of nitrite reductase by ligand insertion.

Variants of the copper-containing nitrite reductase (NiR) of Alcaligenes faecalis S6 were constructed by site-directed mutagenesis, by which the C-terminal histidine ligand (His145) of the Cu in the type-1 site was replaced by an alanine or a glycine. The type-1 sites in the NiR variants as isolated, are in the reduced form, but can be oxidized in the presence of external ligands, like (substituted) imidazoles and chloride. The reduction potential of the type-1 site of NiR-H145A reconstituted with imidazole amounts to 505 mV vs NHE (20 degrees C, pH 7, 10 mM imidazole), while for the native type-1 site it amounts to 260 mV. XRD data on crystals of the reduced and oxidized NiR-H145A variant show that in the reduced type-1 site the metal is 3-coordinated, but in the oxidized form takes up a ligand from the solution. With the fourth (exogenous) ligand in place the type-1 site is able to accept electrons at about the same rate as the wt NiR, but it is unable to pass the electron onto the type-2 site, leading to loss of enzymatic activity. It is argued that the uptake of an electron by the mutated type-1 site is accompanied by a loss of the exogenous ligand and a concomitant rise of the redox potential. This rise effectively traps the electron in the type-1 site.